Original file
Mercedes-Benz GLC Bosch MED17.7.3.1 MED1775-18B-41320_Star23-M177-205M_253M-192900 / 1277771235
An original (stock) flash read of the Bosch MED17.7.3.1 control unit, fitted in Mercedes-Benz GLC, hardware number MED1775-18B-41320_Star23-M177-205M_253M-192900 and software number 1277771235, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz GLC4.0 petrol 510PS
- Control unit
- Bosch MED17.7.3.1
- Read type
- Full read (boot area included)
- File
- 8,192.00 KB · Flash
- Hardware number
- MED1775-18B-41320_Star23-M177-205M_253M-192900
- Software number
- 1277771235
- Bosch part / software
- 10SW050140
- Software / calibration
- 1779020601
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Car model | GLC |
| Engine | 4.0 petrol 510PS |
| Power | 510.0PS / 375.1kW |
| Control unit | Bosch MED17.7.3.1 |
|---|---|
| ECU maker | Bosch |
| Hardware number | MED1775-18B-41320_Star23-M177-205M_253M-192900 |
| Software number | 1277771235 |
| File type | Original flash read |
|---|---|
| File size | 8,192.00 KB (8,388,608 bytes) |
| File key | f6640837a7374285 |
| ECU name | MED17.7.5 | |
|---|---|---|
| Read type | Full read (boot area included) | |
| Processor | TC1793 | |
| Bosch part / software | 10SW050140 | Offset in the file: 0x02001A |
| Software / calibration | 1779020601 | Offset in the file: 0x020213 |
| Data set number | 1779033603 | Offset in the file: 0x1D467D |
| Boot software | 1779049600 | Offset in the file: 0x00FC4D |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MED17.7.3.1 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number MED1775-18B-41320_Star23-M177-205M_253M-192900 and software number 1277771235. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MED17.7.3.1
| Hardware | Software | Vehicles |
|---|---|---|
| 6J52590Q83CTO00 | 2769030405 | Mercedes-Benz C43 AMG |
| 8D39060O83B | 1037518295 | Mercedes-Benz S500, Mercedes-Benz E-Class |
| A2769007500 | 1037546889 | Mercedes-Benz C |
| A2769007500 | 10SW011376 | Mercedes-Benz E |
| M276LA_AMG-BR253M-01-201222 | 075013 | Mercedes-Benz GLC 43AMG |
| MED1773-18B-SER_043-Star23-M276LA_AMG-BR253M-03-190920a | 10SW056712 | Mercedes-Benz GLC |
| MED1773-18B-SER_044-Star23-M276LA_AMG-BR253M-01-190823a | 10SW055642 | Mercedes-Benz GLC 43AMG |
| MED1773-18B-SER_044-Star23-M276LA_AMG-BR253M-01-201222a | 1037528541 | Mercedes-Benz |