Original file

Mercedes-Benz E63 S Bosch MED17.7.5 MED1775-17B-39310_Star23-M177_LS2-222_217_213-181900 / 008917

An original (stock) flash read of the Bosch MED17.7.5 control unit, fitted in Mercedes-Benz E63 S, hardware number MED1775-17B-39310_Star23-M177_LS2-222_217_213-181900 and software number 008917, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz E63 S4.0 612PS
Control unit
Bosch MED17.7.5
Read type
Full read (boot area included)
File
8,192.00 KB · Flash
Hardware number
MED1775-17B-39310_Star23-M177_LS2-222_217_213-181900
Software number
008917
Bosch part / software
10SW034989
Software / calibration
1779029800

Technical data

Vehicle
BrandMercedes-Benz
Car modelE63 S
Engine4.0 612PS
FuelPetrol
Control unit
Control unitBosch MED17.7.5
ECU makerBosch
Hardware numberMED1775-17B-39310_Star23-M177_LS2-222_217_213-181900
Software number008917
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File key1e2c68defbcb2b0e
Identification read from the file
ECU nameMED17.7.5
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW034989Offset in the file: 0x02001A
Software / calibration1779029800Offset in the file: 0x020213
Data set number1779034701Offset in the file: 0x48E169
Boot software1779040100Offset in the file: 0x00FC4D

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.7.5 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number MED1775-17B-39310_Star23-M177_LS2-222_217_213-181900 and software number 008917. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.7.5

Bosch MED17.7.5 original files

The Bosch MED17.7.5 unit page