Original file
Mercedes-Benz G Bosch MED17.7.5 MED1775-17B-39310_Star23-M177_LS2-463M_167-181100 / 10SW008917
An original (stock) flash read of the Bosch MED17.7.5 control unit, fitted in Mercedes-Benz G, hardware number MED1775-17B-39310_Star23-M177_LS2-463M_167-181100 and software number 10SW008917, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz Gpetrol 603PS
- Control unit
- Bosch MED17.7.5
- Read type
- Full read (boot area included)
- File
- 8,192.00 KB · Flash
- Hardware number
- MED1775-17B-39310_Star23-M177_LS2-463M_167-181100
- Software number
- 10SW008917
- Bosch part / software
- 10SW034989
- Software / calibration
- 1779029800
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Car model | G |
| Engine | petrol 603PS |
| Displacement | 5.5 |
| Power | 603.0PS / 443.5kW |
| Control unit | Bosch MED17.7.5 |
|---|---|
| ECU maker | Bosch |
| Hardware number | MED1775-17B-39310_Star23-M177_LS2-463M_167-181100 |
| Software number | 10SW008917 |
| File type | Original flash read |
|---|---|
| File size | 8,192.00 KB (8,388,608 bytes) |
| File key | a928bde6a574da0e |
| ECU name | MED17.7.5 | |
|---|---|---|
| Read type | Full read (boot area included) | |
| Processor | TC1793 | |
| Bosch part / software | 10SW034989 | Offset in the file: 0x02001A |
| Software / calibration | 1779029800 | Offset in the file: 0x020213 |
| Data set number | 1779034401 | Offset in the file: 0x48E169 |
| Boot software | 1779040100 | Offset in the file: 0x00FC4D |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MED17.7.5 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number MED1775-17B-39310_Star23-M177_LS2-463M_167-181100 and software number 10SW008917. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MED17.7.5
| Hardware | Software | Vehicles |
|---|---|---|
| MED1775-17B-39 | 044763 | Mercedes-Benz E63 S |
| MED1775-17B-39310_Star21-M177-253-182300 | 1277771235 | Mercedes-Benz GLC |
| MED1775-17B-39310_Star23-M176-463M-182000 | 1277771235 | Mercedes-Benz G500, Mercedes-Benz G |
| MED1775-17B-39310_Star23-M177_LS2-222_217_213-181900 | 008917 | Mercedes-Benz E63 S |
| MED1775-17B-39310_Star23-M177_LS2_nATL-290-182500 | 039691 | Mercedes-Benz AMG -GT |
| MED1775-17B-39430_Star23-M176-463M-183900 | 1277771235 | Mercedes-Benz G |
| MED1775-17B-39430_Star23-M177-205M_253M-184000 | 1277771235 | Mercedes-Benz C63, Mercedes-Benz C63 AMG, Mercedes-Benz C |
| MED1775-17B-39430_Star23-M177_LS2-222_217_213-184200 | 10SW008917 | Mercedes-Benz G63 AMG S |