Original file

Mercedes-Benz G63 AMG S Bosch MED17.7.5 MED1775-17B-39430_Star23-M177_LS2-222_217_213-184200 / 10SW008917

An original (stock) flash read of the Bosch MED17.7.5 control unit, fitted in Mercedes-Benz G63 AMG S, hardware number MED1775-17B-39430_Star23-M177_LS2-222_217_213-184200 and software number 10SW008917, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz G63 AMG S4.0 petrol 603PS
Control unit
Bosch MED17.7.5
Read type
Full read (boot area included)
File
8,192.00 KB · Flash
Hardware number
MED1775-17B-39430_Star23-M177_LS2-222_217_213-184200
Software number
10SW008917
Bosch part / software
10SW043739
Software / calibration
1779020301

Technical data

Vehicle
BrandMercedes-Benz
Car modelG63 AMG S
Engine4.0 petrol 603PS
Power603.0PS / 443.5kW
Control unit
Control unitBosch MED17.7.5
ECU makerBosch
Hardware numberMED1775-17B-39430_Star23-M177_LS2-222_217_213-184200
Software number10SW008917
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File keya2d9d87b2903a64b
Identification read from the file
ECU nameMED17.7.5
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW043739Offset in the file: 0x02001A
Software / calibration1779020301Offset in the file: 0x020213
Data set number1779035501Offset in the file: 0x48E4D1
Boot software1779040100Offset in the file: 0x00FC4D

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.7.5 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number MED1775-17B-39430_Star23-M177_LS2-222_217_213-184200 and software number 10SW008917. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.7.5

Bosch MED17.7.5 original files

The Bosch MED17.7.5 unit page