Original file

Mercedes-Benz GLE Bosch MED17.7.5 MED1775-19A_FRG-42380_S / 10SW077775

An original (stock) flash read of the Bosch MED17.7.5 control unit, fitted in Mercedes-Benz GLE, hardware number MED1775-19A_FRG-42380_S and software number 10SW077775, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz GLE4.0 diesel 612PS
Control unit
Bosch MED17.7.5
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
MED1775-19A_FRG-42380_S
Software number
10SW077775

Technical data

Vehicle
BrandMercedes-Benz
Car modelGLE
Engine4.0 diesel 612PS
Power612.0PS / 450.1kW
Control unit
Control unitBosch MED17.7.5
ECU makerBosch
Hardware numberMED1775-19A_FRG-42380_S
Software number10SW077775
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyd1265f53843b8d78
Identification read from the file
ECU nameMED17.7.5
Read typeCalibration only (data set)
Bosch part / software10SW077775Offset in the file: 0x14001A
Data set number1779034705Offset in the file: 0x1D96C5

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.7.5 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number MED1775-19A_FRG-42380_S and software number 10SW077775. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.7.5

Bosch MED17.7.5 original files

The Bosch MED17.7.5 unit page