Original file

Mercedes-Benz C160 Bosch MED17.7.7 2649024100 / 2649031901

An original (stock) flash read of the Bosch MED17.7.7 control unit, fitted in Mercedes-Benz C160, hardware number 2649024100 and software number 2649031901, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz C1601.6 · 129.0PS / 94.9kW
Control unit
Bosch MED17.7.7
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
2649024100
Software number
2649031901
Bosch part / software
10SW049294

Technical data

Vehicle
BrandMercedes-Benz
Car modelC160
Engine1.6
FuelPetrol
Power129.0PS / 94.9kW
Control unit
Control unitBosch MED17.7.7
ECU makerBosch
Hardware number2649024100
Software number2649031901
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key78ff11c3be3aec34
Identification read from the file
ECU nameMED17.7
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW049294Offset in the file: 0x02001A
Software / calibration2649024100Offset in the file: 0x020213
Data set number2649031901Offset in the file: 0x29B235
Boot software2649040400Offset in the file: 0x00FC4D
Internal build string001_5.11.00_CFG13;0Offset in the file: 0x00FC24
Bosch project identifier (EPK)36/1/MED17/3///D177_4A8_18B045S01///Offset in the file: 0x2BDF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.7.7 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 2649024100 and software number 2649031901. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.7.7

HardwareSoftwareVehicles
039623026110SW039623Mercedes-Benz C260
26490235002649040300Mercedes-Benz A250
2649023700039623Mercedes-Benz A
2649024100039623Mercedes-Benz A200, Mercedes-Benz CLA, Mercedes-Benz C260
26490241002649040400Mercedes-Benz A
26490243002649036901Mercedes-Benz GLB 35AMG
2649024600039623Mercedes-Benz C260
2649024700039623Mercedes-Benz E300

Bosch MED17.7.7 original files

The Bosch MED17.7.7 unit page