Original file

Mercedes-Benz C260 Bosch MED17.7.7 2649024600 / 039623

An original (stock) flash read of the Bosch MED17.7.7 control unit, fitted in Mercedes-Benz C260, hardware number 2649024600 and software number 039623, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz C2601.5 · 184.0PS / 135.3kW
Control unit
Bosch MED17.7.7
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
2649024600
Software number
039623
Bosch part / software
10SW065280

Technical data

Vehicle
BrandMercedes-Benz
Car modelC260
Engine1.5
FuelPetrol
Power184.0PS / 135.3kW
Control unit
Control unitBosch MED17.7.7
ECU makerBosch
Hardware number2649024600
Software number039623
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key9ee3b63f50d7272f
Identification read from the file
ECU nameMED17.7
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW065280Offset in the file: 0x02001A
Software / calibration2649024600Offset in the file: 0x020213
Data set number2649038001Offset in the file: 0x2A3B7D
Boot software2649040400Offset in the file: 0x00FC4D
Internal build string001_5.11.00_CFG13;0Offset in the file: 0x00FC24
Bosch project identifier (EPK)35/1/MED17/3///D177_4AE1_19B043S///Offset in the file: 0x2BDF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.7.7 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 2649024600 and software number 039623. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.7.7

HardwareSoftwareVehicles
2649024100039623Mercedes-Benz A200, Mercedes-Benz CLA, Mercedes-Benz C260
26490241002649031901Mercedes-Benz C160
26490241002649040400Mercedes-Benz A
26490243002649036901Mercedes-Benz GLB 35AMG
2649024700039623Mercedes-Benz E300
26490247002649032602Mercedes-Benz CLA 35 AMG
2649024900039623Mercedes-Benz GLA250, Mercedes-Benz CLA250
2649024900063081Mercedes-Benz A35 AMG

Bosch MED17.7.7 original files

The Bosch MED17.7.7 unit page