Original file

Mercedes-Benz E300 Bosch MED17.7.7 2649025200 / 2649039502

An original (stock) flash read of the Bosch MED17.7.7 control unit, fitted in Mercedes-Benz E300, hardware number 2649025200 and software number 2649039502, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz E3002.0 258PS
Control unit
Bosch MED17.7.7
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
2649025200
Software number
2649039502
Bosch part / software
10SW072093

Technical data

Vehicle
BrandMercedes-Benz
Car modelE300
Engine2.0 258PS
FuelPetrol
Control unit
Control unitBosch MED17.7.7
ECU makerBosch
Hardware number2649025200
Software number2649039502
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key73e769d641e329e6
Identification read from the file
ECU nameMED17.7
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW072093Offset in the file: 0x02001A
Software / calibration2649025200Offset in the file: 0x020213
Data set number2649039502Offset in the file: 0x2A4975
Boot software2649040400Offset in the file: 0x00FC4D
Internal build string001_5.11.00_CFG13;0Offset in the file: 0x00FC24
Bosch project identifier (EPK)37/1/MED17/3///D177_4AF1_19B241S03///Offset in the file: 0x2BDF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.7.7 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 2649025200 and software number 2649039502. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.7.7

HardwareSoftwareVehicles
26490247002649032602Mercedes-Benz CLA 35 AMG
2649024900039623Mercedes-Benz GLA250, Mercedes-Benz CLA250
2649024900063081Mercedes-Benz A35 AMG
26490252002649039202Mercedes-Benz A435 AMG
26490275002649037103Mercedes-Benz E260
264903540110SW049294Mercedes-Benz E
264904030010SW026750Mercedes-Benz A, Mercedes-Benz CLA220
264904040010SW039623Mercedes-Benz C200

Bosch MED17.7.7 original files

The Bosch MED17.7.7 unit page