Original file

Mercedes-Benz A Bosch MED17.7.7 2649040300 / 10SW026750

An original (stock) flash read of the Bosch MED17.7.7 control unit, fitted in Mercedes-Benz A, hardware number 2649040300 and software number 10SW026750, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz A4.9 petrol 225PS
Control unit
Bosch MED17.7.7
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
2649040300
Software number
10SW026750
Bosch part / software
10SW039856
Software / calibration
2649023500

Technical data

Vehicle
BrandMercedes-Benz
Car modelA
Engine4.9 petrol 225PS
Power225.0PS / 165.5kW
Control unit
Control unitBosch MED17.7.7
ECU makerBosch
Hardware number2649040300
Software number10SW026750
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key6fc5c8a5c7737666
Identification read from the file
ECU nameMED17.7
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW039856Offset in the file: 0x02001A
Software / calibration2649023500Offset in the file: 0x020213
Data set number2649039700Offset in the file: 0x3BB5C1
Boot software2649040300Offset in the file: 0x00FC4D
Internal build string001_5.10.00_CFG13;0Offset in the file: 0x00FC24
Bosch project identifier (EPK)36/1/MED17/3///D177_4A5_18A043S01///Offset in the file: 0x3FDF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.7.7 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 2649040300 and software number 10SW026750. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-Benz AFlash4,096.00 KB€15Add to cart
Mercedes-Benz CLA220Flash4,096.00 KB€15Add to cart

All reads of 2649040300 / 10SW026750

Other pairs of Bosch MED17.7.7

HardwareSoftwareVehicles
26490252002649039202Mercedes-Benz A435 AMG
26490252002649039502Mercedes-Benz E300
26490275002649037103Mercedes-Benz E260
264903540110SW049294Mercedes-Benz E
264904040010SW039623Mercedes-Benz C200
8Z39070J8001037521338Mercedes-Benz SLK55
A264900130010SW049294Mercedes-Benz C
ME177_9700D010_51037521144Mercedes-Benz CLS

Bosch MED17.7.7 original files

The Bosch MED17.7.7 unit page