Original file
Mercedes-Benz CLA Bosch MED17.7.7 MED41x-18B-SER_045_00-STAR23-x-M26Xxx-DEH20-WBxxx-EAXxx-xxxx / 10SW039623
An original (stock) flash read of the Bosch MED17.7.7 control unit, fitted in Mercedes-Benz CLA, hardware number MED41x-18B-SER_045_00-STAR23-x-M26Xxx-DEH20-WBxxx-EAXxx-xxxx and software number 10SW039623, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz CLA2.0 petrol 306PS
- Control unit
- Bosch MED17.7.7
- Read type
- Full read (boot area included)
- File
- 4,096.00 KB · Flash
- Hardware number
- MED41x-18B-SER_045_00-STAR23-x-M26Xxx-DEH20-WBxxx-EAXxx-xxxx
- Software number
- 10SW039623
- Bosch part / software
- 10SW049294
- Software / calibration
- 2649024100
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Car model | CLA |
| Engine | 2.0 petrol 306PS |
| Power | 306.0PS / 225.1kW |
| Control unit | Bosch MED17.7.7 |
|---|---|
| ECU maker | Bosch |
| Hardware number | MED41x-18B-SER_045_00-STAR23-x-M26Xxx-DEH20-WBxxx-EAXxx-xxxx |
| Software number | 10SW039623 |
| File type | Original flash read |
|---|---|
| File size | 4,096.00 KB (4,194,304 bytes) |
| File key | 76999d4870275343 |
| ECU name | MED17.7 | |
|---|---|---|
| Read type | Full read (boot area included) | |
| Processor | TC1793 | |
| Bosch part / software | 10SW049294 | Offset in the file: 0x02001A |
| Software / calibration | 2649024100 | Offset in the file: 0x020213 |
| Data set number | 2649031301 | Offset in the file: 0x29B235 |
| Boot software | 2649040400 | Offset in the file: 0x00FC4D |
| Internal build string | 001_5.11.00_CFG13;0 | Offset in the file: 0x00FC24 |
| Bosch project identifier (EPK) | 34/1/MED17/3///D177_4A6_18B045S/// | Offset in the file: 0x2BDF08 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MED17.7.7 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number MED41x-18B-SER_045_00-STAR23-x-M26Xxx-DEH20-WBxxx-EAXxx-xxxx and software number 10SW039623. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MED17.7.7
| Hardware | Software | Vehicles |
|---|---|---|
| 2649040400 | 10SW039623 | Mercedes-Benz C200 |
| 8Z39070J800 | 1037521338 | Mercedes-Benz SLK55 |
| A2649001300 | 10SW049294 | Mercedes-Benz C |
| ME177_9700D010_5 | 1037521144 | Mercedes-Benz CLS |
| MED41-18A-SER_043_00-STAR23- | 10SW039856 | Mercedes-Benz C200 |
| MED41x-18B-SER_045_00-STAR23-x-M26Xxx-DEH15-WDxxx-EAX | 10SW049294 | Mercedes-Benz C |
| MED41x-19A-SER_046_00-STAR23-x-M26Xxx-DEH20-WFxxx-EAXxx-xxxx | 10SW070392 | Mercedes-Benz E |
| MED41x-19B-SER_131_00-STAR23-x-M26Xxx-DEH20-WAxxx-EAXxx-20Ax | 10SW063081 | Mercedes-Benz GLA |