Original file
Mercedes-Benz E Bosch MED17.7.7 MED41x-19A-SER_046_00-STAR23-x-M26Xxx-DEH20-WFxxx-EAXxx-xxxx / 10SW070392
An original (stock) flash read of the Bosch MED17.7.7 control unit, fitted in Mercedes-Benz E, hardware number MED41x-19A-SER_046_00-STAR23-x-M26Xxx-DEH20-WFxxx-EAXxx-xxxx and software number 10SW070392, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz E2.0 petrol 197PS
- Control unit
- Bosch MED17.7.7
- Read type
- OBD read (no boot area)
- File
- 2,048.00 KB · Flash
- Hardware number
- MED41x-19A-SER_046_00-STAR23-x-M26Xxx-DEH20-WFxxx-EAXxx-xxxx
- Software number
- 10SW070392
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Car model | E |
| Engine | 2.0 petrol 197PS |
| Power | 197PS / 144.9kW |
| Control unit | Bosch MED17.7.7 |
|---|---|
| ECU maker | Bosch |
| Hardware number | MED41x-19A-SER_046_00-STAR23-x-M26Xxx-DEH20-WFxxx-EAXxx-xxxx |
| Software number | 10SW070392 |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | 4eab7ec28a18b007 |
| ECU name | MED17.7 | |
|---|---|---|
| Read type | OBD read (no boot area) | |
| Bosch part / software | 10SW070392 | Offset in the file: 0x02001A |
| Data set number | 2649030902 | Offset in the file: 0x0A12A1 |
| Bosch project identifier (EPK) | 35/1/MED17/3///D177_4AF1_19A046S/// | Offset in the file: 0x0BDF08 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MED17.7.7 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number MED41x-19A-SER_046_00-STAR23-x-M26Xxx-DEH20-WFxxx-EAXxx-xxxx and software number 10SW070392. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MED17.7.7
| Hardware | Software | Vehicles |
|---|---|---|
| 2649040400 | 10SW039623 | Mercedes-Benz C200 |
| 8Z39070J800 | 1037521338 | Mercedes-Benz SLK55 |
| A2649001300 | 10SW049294 | Mercedes-Benz C |
| ME177_9700D010_5 | 1037521144 | Mercedes-Benz CLS |
| MED41-18A-SER_043_00-STAR23- | 10SW039856 | Mercedes-Benz C200 |
| MED41x-18B-SER_045_00-STAR23-x-M26Xxx-DEH15-WDxxx-EAX | 10SW049294 | Mercedes-Benz C |
| MED41x-18B-SER_045_00-STAR23-x-M26Xxx-DEH20-WBxxx-EAXxx-xxxx | 10SW039623 | Mercedes-Benz CLA |
| MED41x-19B-SER_131_00-STAR23-x-M26Xxx-DEH20-WAxxx-EAXxx-20Ax | 10SW063081 | Mercedes-Benz GLA |