Original file

Mercedes-Benz GLC Bosch MED17.7.x MED1775-18B-41410_Star23-M177-205M_253M_RDE-210600 / 1277771235

An original (stock) flash read of the Bosch MED17.7.x control unit, fitted in Mercedes-Benz GLC, hardware number MED1775-18B-41410_Star23-M177-205M_253M_RDE-210600 and software number 1277771235, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz GLCpetrol 476PS
Control unit
Bosch MED17.7.x
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
MED1775-18B-41410_Star23-M177-205M_253M_RDE-210600
Software number
1277771235
Bosch part / software
10SW077555

Technical data

Vehicle
BrandMercedes-Benz
Car modelGLC
Enginepetrol 476PS
Power476.0PS / 350.1kW
Control unit
Control unitBosch MED17.7.x
ECU makerBosch
Hardware numberMED1775-18B-41410_Star23-M177-205M_253M_RDE-210600
Software number1277771235
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key8590c1b19431fe23
Identification read from the file
ECU nameMED17.7.5
Read typeCalibration only (data set)
Bosch part / software10SW077555Offset in the file: 0x14001A
Data set number1779034805Offset in the file: 0x1D4691

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.7.x whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number MED1775-18B-41410_Star23-M177-205M_253M_RDE-210600 and software number 1277771235. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.7.x

HardwareSoftwareVehicles
1037550094Mercedes-Benz C
10SW011239Mercedes-Benz V, Mercedes-Benz V200 W447
10SW036138Mercedes-Benz C
10SW070392Mercedes-Benz C, Mercedes-Benz E300
00544788400054478840Mercedes-Benz CLS63 AMG
MED1773-18B-SER_044-Star23-M276LA_AMG-BR253M-01-201222a10SW075013Mercedes-Benz GLC

Bosch MED17.7.x original files