Original file

Mercedes-Benz A45 Bosch MED17.7 4A42110CS0H0000 / 1037526717

An original (stock) flash read of the Bosch MED17.7 control unit, fitted in Mercedes-Benz A45, hardware number 4A42110CS0H0000 and software number 1037526717, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz A452.0 petrol 381PS
Control unit
Bosch MED17.7
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
4A42110CS0H0000
Software number
1037526717
Bosch part / software
10SW007687
Software / calibration
1339021500

Technical data

Vehicle
BrandMercedes-Benz
Car modelA45
Engine2.0 petrol 381PS
Power381.0PS / 280.2kW
Control unit
Control unitBosch MED17.7
ECU makerBosch
Hardware number4A42110CS0H0000
Software number1037526717
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyfc4548fd810ba950
Identification read from the file
ECU nameMED17.7
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software10SW007687Offset in the file: 0x02001A
Software / calibration1339021500Offset in the file: 0x02020F
Data set number1339032100Offset in the file: 0x3EF748
Boot software2709040700Offset in the file: 0x00FC51
Internal build stringME177_9700D010_6.70_SERIES;0 M270Offset in the file: 0x00FC28

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.7 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4A42110CS0H0000 and software number 1037526717. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.7

HardwareSoftwareVehicles
27690261001037521144Mercedes-Benz ML 300
27690340032769034003Mercedes-Benz SLC 43 AMG
27890231001037521144Mercedes-Benz E 63 AMG, Mercedes-Benz CLS500
4A40070BS0H00001037526717Mercedes-Benz A45, Mercedes-Benz CLA
6B46540N83RT00010SW014025Mercedes-Benz SLC
6D39060C93B1037508406Mercedes-Benz E300, Mercedes-Benz E-Class
6D39060D93B1037508406Mercedes-Benz C, Mercedes-Benz C350, Mercedes-Benz CLS350
8D39060O83B1037508406Mercedes-Benz CLS55, Mercedes-Benz CLS500, Mercedes-Benz CLS

Bosch MED17.7 original files