Original file

Mercedes-Benz E63 Bosch MED17.7 8D42100U83B0002 / 1037521144

An original (stock) flash read of the Bosch MED17.7 control unit, fitted in Mercedes-Benz E63, hardware number 8D42100U83B0002 and software number 1037521144, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz E635.5 · 575.0PS / 422.9kW
Control unit
Bosch MED17.7
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
8D42100U83B0002
Software number
1037521144
Bosch part / software
1037531296
Software / calibration
2789021200

Technical data

Vehicle
BrandMercedes-Benz
Car modelE63
Engine5.5
FuelPetrol
Power575.0PS / 422.9kW
Control unit
Control unitBosch MED17.7
ECU makerBosch
Hardware number8D42100U83B0002
Software number1037521144
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key3f69604d2cfb3932
Identification read from the file
ECU nameMED17.7
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037531296Offset in the file: 0x02001A
Software / calibration2789021200Offset in the file: 0x02020F
Data set number1579032400Offset in the file: 0x3F5376
Boot software0009040300Offset in the file: 0x00FC51
Internal build stringME177_9700D010_5.60;0 MOffset in the file: 0x00FC28

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.7 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 8D42100U83B0002 and software number 1037521144. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.7

HardwareSoftwareVehicles
6D39060D93B1037508406Mercedes-Benz C, Mercedes-Benz C350, Mercedes-Benz CLS350
8D39060O83B1037508406Mercedes-Benz CLS55, Mercedes-Benz CLS500, Mercedes-Benz CLS
8D41070P83B00001037525877Mercedes-Benz GL500
8D42100O83B00001037521144Mercedes-Benz E, Mercedes-Benz CLS550
A10375211441037508406Mercedes-Benz
A264903950010SW042595Mercedes-Benz
MED1772-17B-SER-44050_Star1-M133-117_156_176-180316a1037526717Mercedes-Benz
MED1773-17B-SER-45690_St1-M157-166M_292-181019a1037521144Mercedes-Benz GLE 63 AMG

Bosch MED17.7 original files