Original file

CF Moto 625 Bosch MED17.8.10 99887776655544433322221110000 / 9DSV-001000-B101F01RB0DL5AF01RB0DL5A

An original (stock) flash read of the Bosch MED17.8.10 control unit, fitted in CF Moto 625, hardware number 99887776655544433322221110000 and software number 9DSV-001000-B101F01RB0DL5AF01RB0DL5A, 1,536.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
CF Moto 625petrol
Control unit
Bosch MED17.8.10
Read type
Full read (boot area included)
File
1,536.00 KB · Flash
Hardware number
99887776655544433322221110000
Software number
9DSV-001000-B101F01RB0DL5AF01RB0DL5A
Bosch part / software
F01R0AD3G0
Software / calibration
GS1E03A800

Technical data

Vehicle
BrandCF Moto
Car model625
Enginepetrol
Control unit
Control unitBosch MED17.8.10
ECU makerBosch
Hardware number99887776655544433322221110000
Software number9DSV-001000-B101F01RB0DL5AF01RB0DL5A
File
File typeOriginal flash read
File size1,536.00 KB (1,572,864 bytes)
File keyd28e436ff92d44ca
Identification read from the file
ECU nameMED17.8.10
Read typeFull read (boot area included)
Bosch part / softwareF01R0AD3G0Offset in the file: 0x00001A
Software / calibrationGS1E03A800Offset in the file: 0x13FF08
Bosch project identifier (EPK)38/1/MED17/385/MED17810//GS1E03A800///Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.8.10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 99887776655544433322221110000 and software number 9DSV-001000-B101F01RB0DL5AF01RB0DL5A. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.8.10

HardwareSoftwareVehicles
Great Wall H9Great Wall H9
Great Wall HavalGreat Wall Haval
MG6MG6
Maserati MG 6Maserati MG 6
EL1907AH5EEL1907AH5EGeely Binyue
F01R00DLG8Geely Borui
F01R0ADG2BMG 6
F01R0ADH0WGreat Wall H9

Bosch MED17.8.10 original files

The Bosch MED17.8.10 unit page