Original file

Geely Borui Bosch MED17.8.10 F01R00DLG8

An original (stock) flash read of the Bosch MED17.8.10 control unit, fitted in Geely Borui, hardware number F01R00DLG8, 1,536.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Geely Boruipetrol 186PS
Control unit
Bosch MED17.8.10
Read type
Full read (boot area included)
File
1,536.00 KB · Flash
Hardware number
F01R00DLG8
Bosch part / software
F01R0ADF6T
Software / calibration
DL1407AB00

Technical data

Vehicle
BrandGeely
Car modelBorui
Enginepetrol 186PS
Power186.3PS / 137.0kW
Control unit
Control unitBosch MED17.8.10
ECU makerBosch
Hardware numberF01R00DLG8
File
File typeOriginal flash read
File size1,536.00 KB (1,572,864 bytes)
File key2b191441ad9b89bf
Identification read from the file
ECU nameMED17.8.10
Read typeFull read (boot area included)
ProcessorTC1728
Bosch part / softwareF01R0ADF6TOffset in the file: 0x00C01A
Software / calibrationDL1407AB00Offset in the file: 0x13FF08
Bosch project identifier (EPK)38/1/MED17/385/MED17810//DL1407AB00///Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.8.10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number F01R00DLG8. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.8.10

HardwareSoftwareVehicles
MG6MG6
Maserati MG 6Maserati MG 6
998877766555444333222211100009DSV-001000-B101F01RB0DL5AF01RB0DL5ACF Moto 625
EL1907AH5EEL1907AH5EGeely Binyue
F01R0ADG2BMG 6
F01R0ADH0WGreat Wall H9
F01RB0DL4YF01R00DL4YGS1503A2C3GS1503A2C3CF Moto Z-Force 1000
F01RB0DL5ACF Moto Quad CFORCE

Bosch MED17.8.10 original files

The Bosch MED17.8.10 unit page