Original file
MG 6 Bosch MED17.8.10 F01R0ADG2B
An original (stock) flash read of the Bosch MED17.8.10 control unit, fitted in MG 6, hardware number F01R0ADG2B, 1,536.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- MG 61.5 petrol 170PS
- Control unit
- Bosch MED17.8.10
- Read type
- Full read (boot area included)
- File
- 1,536.00 KB · Flash
- Hardware number
- F01R0ADG2B
- Software / calibration
- D7AP07AM00
Technical data
| Brand | MG |
|---|---|
| Car model | 6 |
| Engine | 1.5 petrol 170PS |
| Power | 170.0PS / 125.0kW |
| Control unit | Bosch MED17.8.10 |
|---|---|
| ECU maker | Bosch |
| Hardware number | F01R0ADG2B |
| File type | Original flash read |
|---|---|
| File size | 1,536.00 KB (1,572,864 bytes) |
| File key | 1338084f1b661387 |
| ECU name | MED17.8.10 | |
|---|---|---|
| Read type | Full read (boot area included) | |
| Processor | TC1728 | |
| Bosch part / software | F01R0ADG2B | Offset in the file: 0x00001A |
| Software / calibration | D7AP07AM00 | Offset in the file: 0x13FF08 |
| Bosch project identifier (EPK) | 38/1/MED17/385/MED17810//D7AP07AM00/// | Offset in the file: 0x13FF08 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MED17.8.10 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number F01R0ADG2B. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MED17.8.10
| Hardware | Software | Vehicles |
|---|---|---|
| Maserati MG 6 | Maserati MG 6 | |
| 99887776655544433322221110000 | 9DSV-001000-B101F01RB0DL5AF01RB0DL5A | CF Moto 625 |
| EL1907AH5E | EL1907AH5E | Geely Binyue |
| F01R00DLG8 | Geely Borui | |
| F01R0ADH0W | Great Wall H9 | |
| F01RB0DL4YF01R00DL4Y | GS1503A2C3GS1503A2C3 | CF Moto Z-Force 1000 |
| F01RB0DL5A | CF Moto Quad CFORCE | |
| F01RB0DL5BF01RB0DL5B | GS1403A8D6GS1403A8D6 | CF Moto UForce, CF Moto UForce 600 |