Original file

CF Moto Quad CFORCE Bosch MED17.8.10 F01RB0DL5A

An original (stock) flash read of the Bosch MED17.8.10 control unit, fitted in CF Moto Quad CFORCE, hardware number F01RB0DL5A, 1,536.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
CF Moto Quad CFORCE40PS
Control unit
Bosch MED17.8.10
Read type
Calibration only (data set)
File
1,536.00 KB · Flash
Hardware number
F01RB0DL5A
Software / calibration
GS1E03A300

Technical data

Vehicle
BrandCF Moto
Car modelQuad CFORCE
Engine40PS
FuelPetrol
Displacement0.6
Power40.0PS / 29.4kW
Control unit
Control unitBosch MED17.8.10
ECU makerBosch
Hardware numberF01RB0DL5A
File
File typeOriginal flash read
File size1,536.00 KB (1,572,864 bytes)
File keyf8f2e29615ed857d
Identification read from the file
ECU nameMED17.8.10
Read typeCalibration only (data set)
Bosch part / softwareF01RB0DL5AOffset in the file: 0x141EFE
Software / calibrationGS1E03A300Offset in the file: 0x17FF08
Bosch project identifier (EPK)38/1/MED17/385/MED17810//GS1E03A300///Offset in the file: 0x17FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.8.10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number F01RB0DL5A. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.8.10

Bosch MED17.8.10 original files

The Bosch MED17.8.10 unit page