Original file
Land Rover Range Rover Sport Bosch MED17.8.3 GPLA-14C204-TTB / 001312
An original (stock) flash read of the Bosch MED17.8.3 control unit, fitted in Land Rover Range Rover Sport, hardware number GPLA-14C204-TTB and software number 001312, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Land Rover Range Rover Sport3.0 · 340.0PS / 250.1kW
- Control unit
- Bosch MED17.8.3
- Read type
- Calibration only (data set)
- File
- 2,048.00 KB · Flash
- Hardware number
- GPLA-14C204-TTB
- Software number
- 001312
- Bosch part / software
- 10SW001312
Technical data
| Brand | Land Rover |
|---|---|
| Car model | Range Rover Sport |
| Engine | 3.0 |
| Fuel | Petrol |
| Power | 340.0PS / 250.1kW |
| Control unit | Bosch MED17.8.3 |
|---|---|
| ECU maker | Bosch |
| Hardware number | GPLA-14C204-TTB |
| Software number | 001312 |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | 7f70193ab53cc687 |
| ECU name | MED17.8.3 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 10SW001312 | Offset in the file: 0x18001A |
| Software / calibration | GPLA-14C204-TTB | Offset in the file: 0x1C6D14 |
| Bosch project identifier (EPK) | 39/1/MED17/54///D1783_126V6_SCM_0850/// | Offset in the file: 0x1FDF08 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MED17.8.3 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number GPLA-14C204-TTB and software number 001312. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MED17.8.3
| Hardware | Software | Vehicles |
|---|---|---|
| FX53-14C204-TTF | 10SW005670 | Jaguar S-Type, Jaguar F-Type |
| FX53-14C204-UTF | 005675 | Jaguar XF |
| GPLA-14C204-TCA | GPLA-14C204-TCA | Land Rover Range Rover Voque |
| GPLA-14C204-TCB | 004069 | Land Rover Range Rover Sport |
| GPLA-14C204-TTC | 004068 | Land Rover Range Rover Sport |
| GPLA-14C204-TTC | 10SW004068 | Land Rover Range Rover |
| GPLA-14C204-UCA | GPLA-14C204-UCA | Land Rover Range Rover Sport |
| GX53-14C204-CTD | 003608 | Jaguar F-Type |