Original file

Jaguar XF Bosch MED17.8.3 GX63-14C204-JAE / 012866

An original (stock) flash read of the Bosch MED17.8.3 control unit, fitted in Jaguar XF, hardware number GX63-14C204-JAE and software number 012866, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Jaguar XF3.0 · 380.0PS / 279.5kW
Control unit
Bosch MED17.8.3
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
GX63-14C204-JAE
Software number
012866
Bosch part / software
10SW012866

Technical data

Vehicle
BrandJaguar
Car modelXF
Engine3.0
FuelPetrol
Power380.0PS / 279.5kW
Control unit
Control unitBosch MED17.8.3
ECU makerBosch
Hardware numberGX63-14C204-JAE
Software number012866
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keybf7fbba6d2edc337
Identification read from the file
ECU nameMED17.8.3
Read typeCalibration only (data set)
Bosch part / software10SW012866Offset in the file: 0x18001A
Software / calibrationGX63-14C204-JAEOffset in the file: 0x1C6D14
Bosch project identifier (EPK)39/1/MED17/54///D1783_126V6_SCM_0852///Offset in the file: 0x1FDF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.8.3 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number GX63-14C204-JAE and software number 012866. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.8.3

Bosch MED17.8.3 original files