Original file

Jaguar XE Bosch MED17.8.3 GX73-14C204-TTD / GX73-14C204-TTD

An original (stock) flash read of the Bosch MED17.8.3 control unit, fitted in Jaguar XE, hardware number GX73-14C204-TTD and software number GX73-14C204-TTD, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Jaguar XE3.0 340PS
Control unit
Bosch MED17.8.3
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
GX73-14C204-TTD
Software number
GX73-14C204-TTD
Bosch part / software
10SW001292

Technical data

Vehicle
BrandJaguar
Car modelXE
Engine3.0 340PS
FuelPetrol
Control unit
Control unitBosch MED17.8.3
ECU makerBosch
Hardware numberGX73-14C204-TTD
Software numberGX73-14C204-TTD
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key7f77d79408ba61b5
Identification read from the file
ECU nameMED17.8.3
Read typeCalibration only (data set)
Bosch part / software10SW001292Offset in the file: 0x18001A
Software / calibrationGX73-14C204-TTDOffset in the file: 0x1C6D14
Bosch project identifier (EPK)39/1/MED17/54///D1783_126V6_SCM_0850///Offset in the file: 0x1FDF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.8.3 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number GX73-14C204-TTD and software number GX73-14C204-TTD. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Jaguar XEFlash2,048.00 KB€15Add to cart

All reads of GX73-14C204-TTD / GX73-14C204-TTD

Other pairs of Bosch MED17.8.3

Bosch MED17.8.3 original files