Original file

Jaguar XJ Bosch MED17.8.3 JW93-14C204-JTF / JW93-14C204-JTF

An original (stock) flash read of the Bosch MED17.8.3 control unit, fitted in Jaguar XJ, hardware number JW93-14C204-JTF and software number JW93-14C204-JTF, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Jaguar XJ3.0 · 340.0PS / 250.1kW
Control unit
Bosch MED17.8.3
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
JW93-14C204-JTF
Software number
JW93-14C204-JTF
Bosch part / software
10SW025961

Technical data

Vehicle
BrandJaguar
Car modelXJ
Engine3.0
FuelPetrol
Power340.0PS / 250.1kW
Control unit
Control unitBosch MED17.8.3
ECU makerBosch
Hardware numberJW93-14C204-JTF
Software numberJW93-14C204-JTF
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key82bef32f3c6e11a6
Identification read from the file
ECU nameMED17.8.3
Read typeCalibration only (data set)
Bosch part / software10SW025961Offset in the file: 0x18001A
Software / calibrationJW93-14C204-JTFOffset in the file: 0x1C6D14
Bosch project identifier (EPK)39/1/MED17/54///D1783_126V6_SCM_0852///Offset in the file: 0x1FDF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.8.3 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number JW93-14C204-JTF and software number JW93-14C204-JTF. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.8.3

HardwareSoftwareVehicles
HK83-14C204-CTDHK8314C204CTDJaguar F-Pace
HX73-14C204-TTC007649Jaguar XF SHIFTECH
HX73-14C204-TTC10SW007649Jaguar F-Pace
HX73-14C204-TTD013819Jaguar XE
JX53-14C204-CAD10SW046084Jaguar F-Type / S / Project 7
JX53-14C204-TTC016647Jaguar F-Type
JX53-14C204-TTC10SW013593Jaguar F-Pace
JX53-14C204-TTC10SW016647Jaguar F-Type

Bosch MED17.8.3 original files