Original file
Jaguar F-Pace Bosch MED17.8.3 JX53-14C204-TTC / 10SW013593
An original (stock) flash read of the Bosch MED17.8.3 control unit, fitted in Jaguar F-Pace, hardware number JX53-14C204-TTC and software number 10SW013593, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Jaguar F-Pace3.0 340PS
- Control unit
- Bosch MED17.8.3
- Read type
- OBD read (no boot area)
- File
- 4,096.00 KB · Flash
- Hardware number
- JX53-14C204-TTC
- Software number
- 10SW013593
- Bosch part / software
- 10SW016647
- Software / calibration
- GX53-12B684-AB
Technical data
| Brand | Jaguar |
|---|---|
| Car model | F-Pace |
| Engine | 3.0 340PS |
| Power | 340.0PS / 250.1kW |
| Control unit | Bosch MED17.8.3 |
|---|---|
| ECU maker | Bosch |
| Hardware number | JX53-14C204-TTC |
| Software number | 10SW013593 |
| File type | Original flash read |
|---|---|
| File size | 4,096.00 KB (4,194,304 bytes) |
| File key | db3d0d0cd179547c |
| ECU name | MED17.8.3 | |
|---|---|---|
| Read type | OBD read (no boot area) | |
| Processor | TC1797 | |
| Bosch part / software | 10SW016647 | Offset in the file: 0x04001A |
| Software / calibration | GX53-12B684-AB | Offset in the file: 0x00FD00 |
| Engine description | JX53-14C204-TTC | Offset in the file: 0x1C8144 |
| Internal build string | MED1783_PBL_054_10.600 | Offset in the file: 0x00FA58 |
| Bosch project identifier (EPK) | 39/1/MED17/54///D1783_126V6_SCM_0860/// | Offset in the file: 0x17FF08 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MED17.8.3 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number JX53-14C204-TTC and software number 10SW013593. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MED17.8.3
| Hardware | Software | Vehicles |
|---|---|---|
| HX73-14C204-TTC | 10SW007649 | Jaguar F-Pace |
| HX73-14C204-TTD | 013819 | Jaguar XE |
| JW93-14C204-JTF | JW93-14C204-JTF | Jaguar XJ |
| JX53-14C204-CAD | 10SW046084 | Jaguar F-Type / S / Project 7 |
| JX53-14C204-TTC | 016647 | Jaguar F-Type |
| JX53-14C204-TTC | 10SW016647 | Jaguar F-Type |
| JX53-14C204-TTC | JX53-14C204-TTC | Jaguar F-Type |
| JX53-14C204-XTB | 10SW020613 | Jaguar F-Type |