Original file
Land Rover Range Rover Bosch MED17.8.31 MED17.5.4 DK62-14C204-RCF / 10SW008664
An original (stock) flash read of the Bosch MED17.8.31 MED17.5.4 control unit, fitted in Land Rover Range Rover, hardware number DK62-14C204-RCF and software number 10SW008664, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Land Rover Range Rover5.0 petrol 508PS
- Control unit
- Bosch MED17.8.31 MED17.5.4
- Read type
- Calibration only (data set)
- File
- 2,048.00 KB · Flash
- Hardware number
- DK62-14C204-RCF
- Software number
- 10SW008664
Technical data
| Brand | Land Rover |
|---|---|
| Car model | Range Rover |
| Engine | 5.0 petrol 508PS |
| Power | 508.0PS / 373.6kW |
| Control unit | Bosch MED17.8.31 MED17.5.4 |
|---|---|
| ECU maker | Bosch |
| Hardware number | DK62-14C204-RCF |
| Software number | 10SW008664 |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | 5905e043aebaf59a |
| ECU name | MED17.8.31 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 10SW008664 | Offset in the file: 0x18001A |
| Software / calibration | DK62-14C204-RCF | Offset in the file: 0x1C59B4 |
| Bosch project identifier (EPK) | 58/1/MED17/54/MED17.8.31//D1783C1_054V8P7SC_M10410/Dst00// | Offset in the file: 0x1FDF08 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MED17.8.31 MED17.5.4 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number DK62-14C204-RCF and software number 10SW008664. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MED17.8.31 MED17.5.4
| Hardware | Software | Vehicles |
|---|---|---|
| DK62-14C204-TTH | 10SW010452 | Land Rover Range Rover |
| GK62-14C204-ETC | 10SW001340 | Land Rover Range Rover |