Original file

Jaguar Supersport Bosch MED17.8.31 DW93-14C204-RTK / 10SW004221

An original (stock) flash read of the Bosch MED17.8.31 control unit, fitted in Jaguar Supersport, hardware number DW93-14C204-RTK and software number 10SW004221, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Jaguar Supersport5.0 510PS
Control unit
Bosch MED17.8.31
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
DW93-14C204-RTK
Software number
10SW004221

Technical data

Vehicle
BrandJaguar
Car modelSupersport
Engine5.0 510PS
Power510.0PS / 375.1kW
Control unit
Control unitBosch MED17.8.31
ECU makerBosch
Hardware numberDW93-14C204-RTK
Software number10SW004221
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key8a2e592e4aa70616
Identification read from the file
ECU nameMED17.8.31
Read typeCalibration only (data set)
Bosch part / software10SW004221Offset in the file: 0x18001A
Software / calibrationDW93-14C204-RTKOffset in the file: 0x1C3FA4
Bosch project identifier (EPK)57/1/MED17/54/MED17.8.31//D1783C1_054V8P4SC_M9460/Dst00//Offset in the file: 0x1FDF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.8.31 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number DW93-14C204-RTK and software number 10SW004221. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.8.31

Bosch MED17.8.31 original files

The Bosch MED17.8.31 unit page