Original file

Jaguar XF Bosch MED17.8.31 DX23-14C204-TTH / 10SW010173

An original (stock) flash read of the Bosch MED17.8.31 control unit, fitted in Jaguar XF, hardware number DX23-14C204-TTH and software number 10SW010173, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Jaguar XF3.0 340PS
Control unit
Bosch MED17.8.31
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
DX23-14C204-TTH
Software number
10SW010173

Technical data

Vehicle
BrandJaguar
Car modelXF
Engine3.0 340PS
Power340.0PS / 250.1kW
Control unit
Control unitBosch MED17.8.31
ECU makerBosch
Hardware numberDX23-14C204-TTH
Software number10SW010173
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key5aafe93eff97556d
Identification read from the file
ECU nameMED17.8.31
Read typeCalibration only (data set)
Bosch part / software10SW010173Offset in the file: 0x18001A
Software / calibrationDX23-14C204-TTHOffset in the file: 0x1C3474
Bosch project identifier (EPK)57/1/MED17/54/MED17.8.31//D1783C1_054V6P3SC_M9450/Dst00//Offset in the file: 0x1FDF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.8.31 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number DX23-14C204-TTH and software number 10SW010173. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.8.31

Bosch MED17.8.31 original files

The Bosch MED17.8.31 unit page