Original file

Jaguar F-Type Bosch MED17.8.31 EX53-14C204-ETD / 1037540991

An original (stock) flash read of the Bosch MED17.8.31 control unit, fitted in Jaguar F-Type, hardware number EX53-14C204-ETD and software number 1037540991, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Jaguar F-Type5.0 · 550.0PS / 404.5kW
Control unit
Bosch MED17.8.31
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
EX53-14C204-ETD
Software number
1037540991

Technical data

Vehicle
BrandJaguar
Car modelF-Type
Engine5.0
FuelPetrol
Power550.0PS / 404.5kW
Control unit
Control unitBosch MED17.8.31
ECU makerBosch
Hardware numberEX53-14C204-ETD
Software number1037540991
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key65fa048e4c4a7788
Identification read from the file
ECU nameMED17.8.31
Read typeCalibration only (data set)
Bosch part / software1037540991Offset in the file: 0x18001A
Software / calibrationEX53-14C204-ETDOffset in the file: 0x1C4414
Bosch project identifier (EPK)58/1/MED17/54/MED17.8.31//D1783C1_054V8P4SC_M10310/Dst00//Offset in the file: 0x1FDF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.8.31 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number EX53-14C204-ETD and software number 1037540991. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.8.31

Bosch MED17.8.31 original files

The Bosch MED17.8.31 unit page