Original file

Land Rover Range Rover Bosch MED17.8.31 GK62-14C204-EAD / 1037538234

An original (stock) flash read of the Bosch MED17.8.31 control unit, fitted in Land Rover Range Rover, hardware number GK62-14C204-EAD and software number 1037538234, 4,096.38 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Land Rover Range Rover5.0 petrol 508PS
Control unit
Bosch MED17.8.31
File size
4,096.38 KB
Contents
Flash
Hardware number
GK62-14C204-EAD
Software number
1037538234
Software / calibration
CPLA-12B684-YE

Technical data

Vehicle
BrandLand Rover
Car modelRange Rover
Engine5.0 petrol 508PS
Power508.0PS / 373.6kW
Control unit
Control unitBosch MED17.8.31
ECU makerBosch
Hardware numberGK62-14C204-EAD
Software number1037538234
File
File typeOriginal flash read
File size4,096.38 KB (4,194,695 bytes)
File key4f9e5d6e49e2679f
Identification read from the file
ECU nameMED17.8.31
ProcessorTC1797
Bosch part / software1037538234Offset in the file: 0x0041A1
Software / calibrationCPLA-12B684-YEOffset in the file: 0x00FE87
Engine descriptionGK62-14C204-EADOffset in the file: 0x1C8BB7
Internal build stringMED1783_PBL_054_10.500Offset in the file: 0x00FBDF
Bosch project identifier (EPK)58/1/MED17/54/MED17.8.31//D1783C1_054V8P7SC_M13510/Dst00//Offset in the file: 0x18008F

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.8.31 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number GK62-14C204-EAD and software number 1037538234. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.8.31

HardwareSoftwareVehicles
FX53-14C204-TTE1037538234Jaguar F-Type, Jaguar F-Type / S / Project 7
FX53-14C204-TTF1037538234Jaguar XF, Jaguar S-Type
GK62-14C204-EAB10SW001339Land Rover Range Rover
GK62-14C204-EAC004889Land Rover Range Rover Sport SVR
GK62-14C204-ETC1037538234Land Rover
GK62-14C204-ETCGK62-14C204-ETCLand Rover Range Rover Sport
GK62-14C204-ETD1037538234Land Rover Range Rover, Land Rover Range Rover Sport
GK62-14C204-ETD10SW005720Land Rover Range Rover

Bosch MED17.8.31 original files

The Bosch MED17.8.31 unit page