Original file
Land Rover Bosch MED17.8.31 GK62-14C204-ETC / 1037538234
An original (stock) flash read of the Bosch MED17.8.31 control unit, fitted in Land Rover, hardware number GK62-14C204-ETC and software number 1037538234, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Land Rover
- Control unit
- Bosch MED17.8.31
- Read type
- OBD read (no boot area)
- File
- 4,096.00 KB · Flash
- Hardware number
- GK62-14C204-ETC
- Software number
- 1037538234
- Bosch part / software
- 10SW001340
- Software / calibration
- CPLA-12B684-YE
Technical data
| Brand | Land Rover |
|---|
| Control unit | Bosch MED17.8.31 |
|---|---|
| ECU maker | Bosch |
| Hardware number | GK62-14C204-ETC |
| Software number | 1037538234 |
| File type | Original flash read |
|---|---|
| File size | 4,096.00 KB (4,194,304 bytes) |
| From the file name | Land Rover D1783C1 |
| File key | 26094e8152574898 |
| ECU name | MED17.8.31 | |
|---|---|---|
| Read type | OBD read (no boot area) | |
| Processor | TC1797 | |
| Bosch part / software | 10SW001340 | Offset in the file: 0x04001A |
| Software / calibration | CPLA-12B684-YE | Offset in the file: 0x00FD00 |
| Engine description | GK62-14C204-ETC | Offset in the file: 0x1C8A30 |
| Internal build string | MED1783_PBL_054_10.500 | Offset in the file: 0x00FA58 |
| Bosch project identifier (EPK) | 58/1/MED17/54/MED17.8.31//D1783C1_054V8P7SC_M13500/Dst00// | Offset in the file: 0x17FF08 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MED17.8.31 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number GK62-14C204-ETC and software number 1037538234. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MED17.8.31
| Hardware | Software | Vehicles |
|---|---|---|
| FX53-14C204-TTF | 1037538234 | Jaguar XF, Jaguar S-Type |
| GK62-14C204-EAB | 10SW001339 | Land Rover Range Rover |
| GK62-14C204-EAC | 004889 | Land Rover Range Rover Sport SVR |
| GK62-14C204-EAD | 1037538234 | Land Rover Range Rover |
| GK62-14C204-ETC | GK62-14C204-ETC | Land Rover Range Rover Sport |
| GK62-14C204-ETD | 1037538234 | Land Rover Range Rover, Land Rover Range Rover Sport |
| GK62-14C204-ETD | 10SW005720 | Land Rover Range Rover |
| GK62-14C204-ETE | GK62-14C204-ETE | Land Rover Range Rover Sport |