Original file
Land Rover Landrover Bosch MED17.8.31 GPLA-14C204-RTC / 1037538234
An original (stock) flash read of the Bosch MED17.8.31 control unit, fitted in Land Rover Landrover, hardware number GPLA-14C204-RTC and software number 1037538234, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Land Rover Landrover5.0 · 510.0PS / 375.1kW
- Control unit
- Bosch MED17.8.31
- Read type
- OBD read (no boot area)
- File
- 4,096.00 KB · Flash
- Hardware number
- GPLA-14C204-RTC
- Software number
- 1037538234
- Bosch part / software
- 10SW001392
- Software / calibration
- CPLA-12B684-YE
Technical data
| Brand | Land Rover |
|---|---|
| Car model | Landrover |
| Engine | 5.0 |
| Fuel | Petrol |
| Power | 510.0PS / 375.1kW |
| Control unit | Bosch MED17.8.31 |
|---|---|
| ECU maker | Bosch |
| Hardware number | GPLA-14C204-RTC |
| Software number | 1037538234 |
| File type | Original flash read |
|---|---|
| File size | 4,096.00 KB (4,194,304 bytes) |
| File key | 188dab03b0bb636c |
| ECU name | MED17.8.31 | |
|---|---|---|
| Read type | OBD read (no boot area) | |
| Processor | TC1797 | |
| Bosch part / software | 10SW001392 | Offset in the file: 0x04001A |
| Software / calibration | CPLA-12B684-YE | Offset in the file: 0x00FD00 |
| Engine description | GPLA-14C204-RTC | Offset in the file: 0x1C8A30 |
| Internal build string | MED1783_PBL_054_10.500 | Offset in the file: 0x00FA58 |
| Bosch project identifier (EPK) | 58/1/MED17/54/MED17.8.31//D1783C1_054V8P7SC_M13500/Dst00// | Offset in the file: 0x17FF08 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MED17.8.31 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number GPLA-14C204-RTC and software number 1037538234. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other reads of this pair
The same hardware and software numbers, read from other vehicles or at other times; each has its page.
| Vehicles | Size | Price | Add to cart |
|---|---|---|---|
| Land Rover Range Rover Sport | 4,096.00 KB | €15 | Add to cart |
Other pairs of Bosch MED17.8.31
| Hardware | Software | Vehicles |
|---|---|---|
| GK62-14C204-ETD | 1037538234 | Land Rover Range Rover, Land Rover Range Rover Sport |
| GK62-14C204-ETD | 10SW005720 | Land Rover Range Rover |
| GK62-14C204-ETE | GK62-14C204-ETE | Land Rover Range Rover Sport |
| GPLA-14C204-RAD | 1037538234 | Land Rover Range Rover |
| GPLA-14C204-RTC | 10SW001392 | Land Rover Range Rover |
| GPLA-14C204-RTD | 1037538234 | Land Rover Range Rover |
| GPLA-14C204-RTF | 1037538234 | Land Rover Range Rover Sport |
| GPLA-14C204-RTF | 10SW023767 | Land Rover Range Rover Sport |