Original file
Jaguar F-Type Bosch MED17.8.31 GX53-14C204-BTD / 1037538234
An original (stock) flash read of the Bosch MED17.8.31 control unit, fitted in Jaguar F-Type, hardware number GX53-14C204-BTD and software number 1037538234, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Jaguar F-Type5.0 · 550.0PS / 404.5kW
- Control unit
- Bosch MED17.8.31
- Read type
- OBD read (no boot area)
- File
- 4,096.00 KB · Flash
- Hardware number
- GX53-14C204-BTD
- Software number
- 1037538234
- Bosch part / software
- 10SW003324
- Software / calibration
- CPLA-12B684-YE
Technical data
| Brand | Jaguar |
|---|---|
| Car model | F-Type |
| Engine | 5.0 |
| Fuel | Petrol |
| Power | 550.0PS / 404.5kW |
| Control unit | Bosch MED17.8.31 |
|---|---|
| ECU maker | Bosch |
| Hardware number | GX53-14C204-BTD |
| Software number | 1037538234 |
| File type | Original flash read |
|---|---|
| File size | 4,096.00 KB (4,194,304 bytes) |
| File key | aa48fd1bce5a2bbf |
| ECU name | MED17.8.31 | |
|---|---|---|
| Read type | OBD read (no boot area) | |
| Processor | TC1797 | |
| Bosch part / software | 10SW003324 | Offset in the file: 0x04001A |
| Software / calibration | CPLA-12B684-YE | Offset in the file: 0x00FD00 |
| Engine description | GX53-14C204-BTD | Offset in the file: 0x1C8A30 |
| Internal build string | MED1783_PBL_054_10.500 | Offset in the file: 0x00FA58 |
| Bosch project identifier (EPK) | 58/1/MED17/54/MED17.8.31//D1783C1_054V8P7SC_M13500/Dst00// | Offset in the file: 0x17FF08 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MED17.8.31 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number GX53-14C204-BTD and software number 1037538234. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MED17.8.31
| Hardware | Software | Vehicles |
|---|---|---|
| GPLA-14C204-TAD | 1037538234 | Land Rover Range Rover Sport |
| GPLA-14C204-TTE | 1037538234 | Land Rover Range Rover |
| GPLA-14C204-UTD | 1037538234 | Land Rover Range Rover |
| GX53-14C204-BAE | 10SW005810 | Jaguar F-Type |
| GX53-14C204-BTE | 10SW005811 | Jaguar XFR, Jaguar F-Type |
| GX53-14C204-BTF | 1037538234 | Jaguar XFR |
| GX53-14C204-BTF | 10SW025479 | Jaguar F-Type |
| GX53-14C204-CTC | 1037539380 | Jaguar F-Type |