Original file

Jaguar F-Type Bosch MED17.8.31 GX53-14C204-CTC / 1037539380

An original (stock) flash read of the Bosch MED17.8.31 control unit, fitted in Jaguar F-Type, hardware number GX53-14C204-CTC and software number 1037539380, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Jaguar F-Type3.0 379PS
Control unit
Bosch MED17.8.31
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
GX53-14C204-CTC
Software number
1037539380
Bosch part / software
1037552072
Software / calibration
GX53-12B684-AA

Technical data

Vehicle
BrandJaguar
Car modelF-Type
Engine3.0 379PS
FuelDiesel
Power379.0PS / 278.8kW
Control unit
Control unitBosch MED17.8.31
ECU makerBosch
Hardware numberGX53-14C204-CTC
Software number1037539380
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key002c0c296482f7cd
Identification read from the file
ECU nameMED17.8.3
Read typeOBD read (no boot area)
ProcessorTC1797
Bosch part / software1037552072Offset in the file: 0x04001A
Software / calibrationGX53-12B684-AAOffset in the file: 0x00FD00
Engine descriptionGX53-14C204-CTCOffset in the file: 0x1C66A0
Internal build stringMED1783_PBL_054_10.500Offset in the file: 0x00FA58
Bosch project identifier (EPK)39/1/MED17/54///D1783_126V6_SCM_0812///Offset in the file: 0x17FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.8.31 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number GX53-14C204-CTC and software number 1037539380. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.8.31

HardwareSoftwareVehicles
GX53-14C204-BTD1037538234Jaguar F-Type
GX53-14C204-BTE10SW005811Jaguar XFR, Jaguar F-Type
GX53-14C204-BTF1037538234Jaguar XFR
GX53-14C204-BTF10SW025479Jaguar F-Type
GX53-14C204-ETD1037538234Jaguar F-Type
GX53-14C204-ETF1037538234Jaguar F-Type
GX53-14C204-TTC1037539380Jaguar F-Type
GX53-14C204-TTD1037539380Jaguar F-Type

Bosch MED17.8.31 original files

The Bosch MED17.8.31 unit page