Original file
Jaguar F-Type Bosch MED17.8.31 JX53-14C204-ZTD / JX53-14C204-ZTD
An original (stock) flash read of the Bosch MED17.8.31 control unit, fitted in Jaguar F-Type, hardware number JX53-14C204-ZTD and software number JX53-14C204-ZTD, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Jaguar F-Type5.0 · 575.0PS / 422.9kW
- Control unit
- Bosch MED17.8.31
- Read type
- OBD read (no boot area)
- File
- 4,096.00 KB · Flash
- Hardware number
- JX53-14C204-ZTD
- Software number
- JX53-14C204-ZTD
- Bosch part / software
- 10SW026047
- Software / calibration
- CPLA-12B684-YF
Technical data
| Brand | Jaguar |
|---|---|
| Car model | F-Type |
| Engine | 5.0 |
| Fuel | Petrol |
| Power | 575.0PS / 422.9kW |
| Control unit | Bosch MED17.8.31 |
|---|---|
| ECU maker | Bosch |
| Hardware number | JX53-14C204-ZTD |
| Software number | JX53-14C204-ZTD |
| File type | Original flash read |
|---|---|
| File size | 4,096.00 KB (4,194,304 bytes) |
| File key | 3aa3e7b3ee5cdd87 |
| ECU name | MED17.8.31 | |
|---|---|---|
| Read type | OBD read (no boot area) | |
| Processor | TC1797 | |
| Bosch part / software | 10SW026047 | Offset in the file: 0x04001A |
| Software / calibration | CPLA-12B684-YF | Offset in the file: 0x00FD00 |
| Engine description | JX53-14C204-ZTD | Offset in the file: 0x1C8F94 |
| Internal build string | MED1783_PBL_054_10.600 | Offset in the file: 0x00FA58 |
| Bosch project identifier (EPK) | 58/1/MED17/54/MED17.8.31//D1783C1_054V8P7SC_M14100/Dst00// | Offset in the file: 0x17FF08 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MED17.8.31 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number JX53-14C204-ZTD and software number JX53-14C204-ZTD. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MED17.8.31
| Hardware | Software | Vehicles |
|---|---|---|
| GX63-14C204-JTD | 1037538234 | Jaguar XF |
| GX73-14C204-TTC | 1037538234 | Jaguar Xe |
| GX73-14C204-TTD | 1037538234 | Jaguar F-Type |
| GX73-14C204-TTF | 1037538234 | Jaguar XE S |
| HK83-14C204-CTD | 10SW013840 | Jaguar F Pace 2017y 3.0L |
| HX73-14C204-JAD | 10SW012869 | Jaguar 35T XE 2017y |
| HX73-14C204-TTC | 1037538234 | Jaguar XE |
| JX53-14C204-BTD | 10SW026043 | Jaguar F type |