Original file

Land Rover Velar Bosch MED17.8.32 HPLA-14C568-TB / 10SW013586

An original (stock) flash read of the Bosch MED17.8.32 control unit, fitted in Land Rover Velar, hardware number HPLA-14C568-TB and software number 10SW013586, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Land Rover Velar3.0 petrol 380PS
Control unit
Bosch MED17.8.32
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
HPLA-14C568-TB
Software number
10SW013586
Bosch part / software
10SW020426

Technical data

Vehicle
BrandLand Rover
Car modelVelar
Engine3.0 petrol 380PS
Power380.0PS / 279.5kW
Control unit
Control unitBosch MED17.8.32
ECU makerBosch
Hardware numberHPLA-14C568-TB
Software number10SW013586
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key0bd74452c43fd81c
Identification read from the file
ECU nameMED17.8.32
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW020426Offset in the file: 0x02001A
Internal build string054_PBL_93_01_XPGF4784Offset in the file: 0x00FC01
Bosch project identifier (EPK)40/1/MED17/54///D17832_126_SCF_GF0481///Offset in the file: 0x1FFE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.8.32 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number HPLA-14C568-TB and software number 10SW013586. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Land Rover VelarFlash4,096.00 KB€15Add to cart
Land Rover Range RoverFlash4,096.00 KB€15Add to cart
Jaguar F-TypeFlash4,096.00 KB€15Add to cart
Land Rover Range Rover SportFlash4,096.00 KB€15Add to cart
Land Rover Range RoverFlash4,096.00 KB€15Add to cart
Land Rover Range RoverFlash4,096.00 KB€15Add to cart
Jaguar F-TypeFlash4,096.00 KB€15Add to cart
Land Rover Range Rover Sport SVRFlash4,096.00 KB€15Add to cart
Jaguar F-TypeFlash4,096.00 KB€15Add to cart
Land Rover Range RoverFlash4,096.00 KB€15Add to cart

All reads of HPLA-14C568-TB / 10SW013586

Other pairs of Bosch MED17.8.32

HardwareSoftwareVehicles
HPLA-14C568-TB013586Land Rover Range Rover Sport SVR
HPLA-14C568-TB10SW017877Land Rover Range Rover
HPLA-14C568-TB10SW023350Land Rover Range Rover Sport
HPLA-14C568-TB10SW030201Land Rover Range Rover
HPLA-14C568-TB10SW039941Jaguar F-Type
HPLA-14C568-TB10SW040668Land Rover Range Rover Sport SVR, Land Rover Range Rover
HPLA-14C568-TB10SW040812Land Rover Range Rover Sport
HPLA-14C568-TB10SW045110Land Rover Range Rover Sport SVR

Bosch MED17.8.32 original files

The Bosch MED17.8.32 unit page