Original file
Land Rover Range Rover Sport Bosch MED17.8.32 HPLA-14C568-TB / HPLA-14C568-TB
An original (stock) flash read of the Bosch MED17.8.32 control unit, fitted in Land Rover Range Rover Sport, hardware number HPLA-14C568-TB and software number HPLA-14C568-TB, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Land Rover Range Rover Sport5.0 · 550.0PS / 404.5kW
- Control unit
- Bosch MED17.8.32
- Read type
- Calibration only (data set)
- File
- 2,048.00 KB · Flash
- Hardware number
- HPLA-14C568-TB
- Software number
- HPLA-14C568-TB
- Bosch part / software
- 10SW023365
Technical data
| Brand | Land Rover |
|---|---|
| Car model | Range Rover Sport |
| Engine | 5.0 |
| Fuel | Petrol |
| Power | 550.0PS / 404.5kW |
| Control unit | Bosch MED17.8.32 |
|---|---|
| ECU maker | Bosch |
| Hardware number | HPLA-14C568-TB |
| Software number | HPLA-14C568-TB |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | fa5cc524ce1e0439 |
| ECU name | MED17.8.32 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 10SW023365 | Offset in the file: 0x02001A |
| Bosch project identifier (EPK) | 40/1/MED17/54///D17832_133_SCF_GF0473/// | Offset in the file: 0x17FF08 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MED17.8.32 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number HPLA-14C568-TB and software number HPLA-14C568-TB. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other reads of this pair
The same hardware and software numbers, read from other vehicles or at other times; each has its page.
| Vehicles | Size | Price | Add to cart |
|---|---|---|---|
| Land Rover Range Rover Sport | 2,048.00 KB | €15 | Add to cart |
| Land Rover Range Rover Sport | 2,048.00 KB | €15 | Add to cart |
| Land Rover Range Rover 5.0 V8 supercharged | 4,096.00 KB | €15 | Add to cart |
Other pairs of Bosch MED17.8.32
| Hardware | Software | Vehicles |
|---|---|---|
| HPLA-14C568-TB | 10SW057832 | Jaguar F-Type |
| HPLA-14C568-TB | 10SW062926 | Jaguar F-Type |
| HPLA-14C568-TB | 10SW068085 | Land Rover Range Rover, Land Rover Range Rover Sport |
| HPLA-14C568-TB | 10SW070582 | Land Rover Range Rover |
| HPLA-14C568-TB | HPLA-14C570-UTC | Land Rover Range Rover Sport |
| HPLA-14C568-TB | HPLA-14C570-UTG | Land Rover Range Rover Sport |
| HPLA-14C568-TB | JK62-14C570-STD | Land Rover Range Rover Sport SVR, Land Rover Range Rover Sport |
| HPLA-14C568-TB | JK62-14C570-STE | Land Rover Range Rover Sport |