Original file

Land Rover RangeRover Bosch MED17.8.32 HPLA-14C568-TB / KPLA-14C570-SHC

An original (stock) flash read of the Bosch MED17.8.32 control unit, fitted in Land Rover RangeRover, hardware number HPLA-14C568-TB and software number KPLA-14C570-SHC, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Land Rover RangeRover5.0 · 524.0PS / 385.4kW
Control unit
Bosch MED17.8.32
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
HPLA-14C568-TB
Software number
KPLA-14C570-SHC
Bosch part / software
10SW040812

Technical data

Vehicle
BrandLand Rover
Car modelRangeRover
Engine5.0
FuelPetrol
Power524.0PS / 385.4kW
Control unit
Control unitBosch MED17.8.32
ECU makerBosch
Hardware numberHPLA-14C568-TB
Software numberKPLA-14C570-SHC
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key6f0921d772e8990d
Identification read from the file
ECU nameMED17.8.32
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW040812Offset in the file: 0x02001A
Internal build string054_PBL_93_01_XPGF4784Offset in the file: 0x00FC01
Bosch project identifier (EPK)39/1/MED17/54///D17832_133_SCF_GV075///Offset in the file: 0x1FFE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.8.32 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number HPLA-14C568-TB and software number KPLA-14C570-SHC. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Land Rover RangeRoverFlash2,048.00 KB€15Add to cart

All reads of HPLA-14C568-TB / KPLA-14C570-SHC

Other pairs of Bosch MED17.8.32

HardwareSoftwareVehicles
HPLA-14C568-TBK8AM-14C570-SHDLand Rover Velar
HPLA-14C568-TBKK62-14C570-SHDLand Rover Range Rover Sport SVR, Land Rover Range Rover Sport
HPLA-14C568-TBKK62-14C570-SHELand Rover Range Rover Sport SVR
HPLA-14C568-TBKK8M-14C570-SHEJaguar F-Pace
HPLA-14C568-TBKPLA-14C570-SHDLand Rover Range Rover Voque
HPLA-14C568-TBLK62-14C570-SHALand Rover Range Rover Sport
HPLA-14C568-TBLPLA-14C570-SHALand Rover Range Rover Sport
HPLA-14C568-TBMK62-14C570-SHCLand Rover Range Rover Sport

Bosch MED17.8.32 original files

The Bosch MED17.8.32 unit page