Original file
Land Rover Range Rover Sport Bosch MED17.8.32 HPLA-14C568-TB / LPLA-14C570-SHA
An original (stock) flash read of the Bosch MED17.8.32 control unit, fitted in Land Rover Range Rover Sport, hardware number HPLA-14C568-TB and software number LPLA-14C570-SHA, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Land Rover Range Rover Sport5.0 · 525PS
- Control unit
- Bosch MED17.8.32
- Read type
- Calibration only (data set)
- File
- 2,048.00 KB · Flash
- Hardware number
- HPLA-14C568-TB
- Software number
- LPLA-14C570-SHA
- Bosch part / software
- 10SW050715
Technical data
| Brand | Land Rover |
|---|---|
| Car model | Range Rover Sport |
| Engine | 5.0 |
| Fuel | Petrol |
| Power | 525PS |
| Control unit | Bosch MED17.8.32 |
|---|---|
| ECU maker | Bosch |
| Hardware number | HPLA-14C568-TB |
| Software number | LPLA-14C570-SHA |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | 7c63ef7a798d49c0 |
| ECU name | MED17.8.32 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 10SW050715 | Offset in the file: 0x02001A |
| Bosch project identifier (EPK) | 39/1/MED17/54///D17832_133_SCF_GV080/// | Offset in the file: 0x17FF08 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MED17.8.32 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number HPLA-14C568-TB and software number LPLA-14C570-SHA. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MED17.8.32
| Hardware | Software | Vehicles |
|---|---|---|
| HPLA-14C568-TB | KK8M-14C570-SHE | Jaguar F-Pace |
| HPLA-14C568-TB | KPLA-14C570-SHC | Land Rover RangeRover |
| HPLA-14C568-TB | KPLA-14C570-SHD | Land Rover Range Rover Voque |
| HPLA-14C568-TB | LK62-14C570-SHA | Land Rover Range Rover Sport |
| HPLA-14C568-TB | MK62-14C570-SHC | Land Rover Range Rover Sport |
| HPLA-14C568-TB | MK62-14C570-SHE | Land Rover Range Rover Sport |
| HPLA-14C568-TB | MX53-14C570-BHD | Jaguar F-Type |
| HPLA-14C570-UCA | 10SW014304 | Land Rover Range Rover |