Original file

Land Rover Range Rover Bosch MED17.8.32 HPLA-14C570-UCA / 10SW014304

An original (stock) flash read of the Bosch MED17.8.32 control unit, fitted in Land Rover Range Rover, hardware number HPLA-14C570-UCA and software number 10SW014304, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Land Rover Range Rover3.0 petrol
Control unit
Bosch MED17.8.32
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
HPLA-14C570-UCA
Software number
10SW014304

Technical data

Vehicle
BrandLand Rover
Car modelRange Rover
Engine3.0 petrol
Control unit
Control unitBosch MED17.8.32
ECU makerBosch
Hardware numberHPLA-14C570-UCA
Software number10SW014304
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyf18166be6dacda8d
Identification read from the file
ECU nameMED17.8.32
Read typeOBD read (no boot area)
Bosch part / software10SW014304Offset in the file: 0x18001A
Bosch project identifier (EPK)40/1/MED17/54///D17832_126_SCF_GF0472///Offset in the file: 0x17FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.8.32 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number HPLA-14C570-UCA and software number 10SW014304. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.8.32

HardwareSoftwareVehicles
HPLA-14C568-TBLPLA-14C570-SHALand Rover Range Rover Sport
HPLA-14C568-TBMK62-14C570-SHCLand Rover Range Rover Sport
HPLA-14C568-TBMK62-14C570-SHELand Rover Range Rover Sport
HPLA-14C568-TBMX53-14C570-BHDJaguar F-Type
HPLA-14C570-UTCHPLA-14C570-UTCLand Rover Range Rover Sport
HPLA-14C570-UTF020530Land Rover Range Rover Sport
HPLA-14C570-UTG10SW028303Land Rover Range Rover
JK83-14C570-UBA10SW020426Land Rover Velar

Bosch MED17.8.32 original files

The Bosch MED17.8.32 unit page