Original file

Land Rover Velar Bosch MED17.8.32 JK83-14C570-UTD / 018741

An original (stock) flash read of the Bosch MED17.8.32 control unit, fitted in Land Rover Velar, hardware number JK83-14C570-UTD and software number 018741, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Land Rover Velar3.0 380PS
Control unit
Bosch MED17.8.32
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
JK83-14C570-UTD
Software number
018741
Bosch part / software
10SW018741

Technical data

Vehicle
BrandLand Rover
Car modelVelar
Engine3.0 380PS
FuelPetrol
Control unit
Control unitBosch MED17.8.32
ECU makerBosch
Hardware numberJK83-14C570-UTD
Software number018741
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key5e4c05ef31fa3540
Identification read from the file
ECU nameMED17.8.32
Read typeCalibration only (data set)
Bosch part / software10SW018741Offset in the file: 0x02001A
Bosch project identifier (EPK)40/1/MED17/54///D17832_126_SCF_GF0481///Offset in the file: 0x17FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.8.32 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number JK83-14C570-UTD and software number 018741. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.8.32

HardwareSoftwareVehicles
HPLA-14C570-UTCHPLA-14C570-UTCLand Rover Range Rover Sport
HPLA-14C570-UTF020530Land Rover Range Rover Sport
HPLA-14C570-UTG10SW028303Land Rover Range Rover
JK83-14C570-UBA10SW020426Land Rover Velar
JK83-14C570-UTD10SW018741Jaguar F-Pace
JK83-14C570-UTDJK83-14C570-UTDJaguar F-Pace
JPLA-14C570-UTC030110Land Rover Range Rover
JX73-14C570-TBA020429Jaguar XE

Bosch MED17.8.32 original files

The Bosch MED17.8.32 unit page