Original file

Honda Civic Type R Bosch MED17.9.3 10SW02574893A1V130 / 1037512340

An original (stock) flash read of the Bosch MED17.9.3 control unit, fitted in Honda Civic Type R, hardware number 10SW02574893A1V130 and software number 1037512340, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Honda Civic Type R2.0 · 320.0PS / 235.4kW
Control unit
Bosch MED17.9.3
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
10SW02574893A1V130
Software number
1037512340
Bosch part / software
10SW025748
Software / calibration
HON1793A1_V130S65_TPROT

Technical data

Vehicle
BrandHonda
Car modelCivic Type R
Engine2.0
FuelPetrol
Power320.0PS / 235.4kW
Control unit
Control unitBosch MED17.9.3
ECU makerBosch
Hardware number10SW02574893A1V130
Software number1037512340
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key671a0bda87076636
Identification read from the file
ECU nameMED17.9.3
Read typeCalibration only (data set)
Bosch part / software10SW025748Offset in the file: 0x14001A
Software / calibrationHON1793A1_V130S65_TPROTOffset in the file: 0x1FFE0C
Internal build string11B.09.08.01RBOffset in the file: 0x19676E
Bosch project identifier (EPK)52/1/MED1793/159/MED1793//HON1793A1_V130S65_TPROT///Offset in the file: 0x1FFE0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.9.3 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 10SW02574893A1V130 and software number 1037512340. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.9.3

Bosch MED17.9.3 original files

The Bosch MED17.9.3 unit page