Original file

Suzuki Swift Bosch MED17.9.63 0045667963 / 10SW004566

An original (stock) flash read of the Bosch MED17.9.63 control unit, fitted in Suzuki Swift, hardware number 0045667963 and software number 10SW004566, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Suzuki Swift1.4 · 140.0PS / 103.0kW
Control unit
Bosch MED17.9.63
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
0045667963
Software number
10SW004566
Vehicle maker's hardware number
33920-68M1
Software / calibration
MED17963_B4_0S302A_12A0

Technical data

Vehicle
BrandSuzuki
Car modelSwift
Engine1.4
FuelPetrol
Power140.0PS / 103.0kW
Control unit
Control unitBosch MED17.9.63
ECU makerBosch
Hardware number0045667963
Software number10SW004566
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key53fdd91e223eea6a
Identification read from the file
ECU nameMED17.9.63
Read typeOBD read (no boot area)
ProcessorTC1793
Bosch part / software10SW004566Offset in the file: 0x02001A
Vehicle maker's hardware number33920-68M1Offset in the file: 0x00422F
Software / calibrationMED17963_B4_0S302A_12A0Offset in the file: 0x1FFE0C
Internal build stringPCFG:CB/248_1793_2.0.0Offset in the file: 0x00EC5C
Bosch project identifier (EPK)54/1/MED17963/248/MED17963//MED17963_B4_0S302A_12A0///Offset in the file: 0x1FFE0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.9.63 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0045667963 and software number 10SW004566. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.9.63

Bosch MED17.9.63 original files

The Bosch MED17.9.63 unit page