Original file

Suzuki Baleno Bosch MED17.9.63 0067357963 / 10SW006735

An original (stock) flash read of the Bosch MED17.9.63 control unit, fitted in Suzuki Baleno, hardware number 0067357963 and software number 10SW006735, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Suzuki Baleno1.0 112PS
Control unit
Bosch MED17.9.63
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
0067357963
Software number
10SW006735
Software / calibration
MED17963_A3_0S320A_14A

Technical data

Vehicle
BrandSuzuki
Car modelBaleno
Engine1.0 112PS
FuelPetrol
Control unit
Control unitBosch MED17.9.63
ECU makerBosch
Hardware number0067357963
Software number10SW006735
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key416a359aa0c494b5
Identification read from the file
ECU nameMED17.9.63
Read typeOBD read (no boot area)
ProcessorTC1793
Bosch part / software10SW006735Offset in the file: 0x02001A
Software / calibrationMED17963_A3_0S320A_14AOffset in the file: 0x1FFE0C
Internal build stringPCFG:CB/248_1793_2.0.0Offset in the file: 0x00EC5C
Bosch project identifier (EPK)53/1/MED17963/248/MED17963//MED17963_A3_0S320A_14A///Offset in the file: 0x1FFE0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.9.63 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0067357963 and software number 10SW006735. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.9.63

Bosch MED17.9.63 original files

The Bosch MED17.9.63 unit page