Original file

Land Rover Range Rover Evoque Bosch MED17.9.7 EJ32-14C204-MBN / EJ32-12A650-MBN

An original (stock) flash read of the Bosch MED17.9.7 control unit, fitted in Land Rover Range Rover Evoque, hardware number EJ32-14C204-MBN and software number EJ32-12A650-MBN, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Land Rover Range Rover Evoque2.0 · 170.0PS / 125.0kW
Control unit
Bosch MED17.9.7
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
EJ32-14C204-MBN
Software number
EJ32-12A650-MBN
Bosch part / software
10SW000571
Software / calibration
EJ32-12B684-MC

Technical data

Vehicle
BrandLand Rover
Car modelRange Rover Evoque
Engine2.0
FuelPetrol
Power170.0PS / 125.0kW
Control unit
Control unitBosch MED17.9.7
ECU makerBosch
Hardware numberEJ32-14C204-MBN
Software numberEJ32-12A650-MBN
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key0e25ead6bf4ed53e
Identification read from the file
ECU nameMED17.9.7
Read typeCalibration only (data set)
Bosch part / software10SW000571Offset in the file: 0x04001A
Vehicle maker's hardware numberEJ32-12A650-MBNOffset in the file: 0x072B22
Software / calibrationEJ32-12B684-MCOffset in the file: 0x072C35
Engine descriptionEJ32-14C204-MBNOffset in the file: 0x072A98
Bosch project identifier (EPK)39/1/MED17/190///D1797_262_M013_0333///Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.9.7 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number EJ32-14C204-MBN and software number EJ32-12A650-MBN. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.9.7

HardwareSoftwareVehicles
EJ32-14C204-MAL1037544258Land Rover Range Rover Evoque 2.0T
EJ32-14C204-MBL1037544257Land Rover Evoque
EJ32-14C204-MBP10SW005974Land Rover Range Rover
EJ32-14C204-MBS1037539251Land Rover Range Rover Evoque 2.0 Si4, Land Rover Range Rover Evoque
EJ32-14C204-MBS10SW011244Land Rover Range Rover Evoque
EJ32-14C204-MEK1037541801Land Rover Range Rover Evoque 2.0 Si4
EJ32-14C204-MER10SW011249Land Rover Range Rover Evoque, Land Rover Evoque
EJ32-14C204-MKL1037544245Land Rover Range Rover

Bosch MED17.9.7 original files

The Bosch MED17.9.7 unit page