Original file
Land Rover Range Rover Evoque 2.0 Si4 Bosch MED17.9.7 EJ32-14C204-MEK / 1037541801
An original (stock) flash read of the Bosch MED17.9.7 control unit, fitted in Land Rover Range Rover Evoque 2.0 Si4, hardware number EJ32-14C204-MEK and software number 1037541801, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Land Rover Range Rover Evoque 2.0 Si42.0 petrol 240.0PS / 176.5kW
- Control unit
- Bosch MED17.9.7
- Read type
- Calibration only (data set)
- File
- 2,048.00 KB · Flash
- Hardware number
- EJ32-14C204-MEK
- Software number
- 1037541801
- Vehicle maker's hardware number
- EJ32-12A650-MEK
- Software / calibration
- EJ32-12B684-MC
Technical data
| Brand | Land Rover |
|---|---|
| Car model | Range Rover Evoque 2.0 Si4 |
| Engine | 2.0 petrol 240.0PS / 176.5kW |
| Control unit | Bosch MED17.9.7 |
|---|---|
| ECU maker | Bosch |
| Hardware number | EJ32-14C204-MEK |
| Software number | 1037541801 |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | ba56d25bc21535bf |
| ECU name | MED17.9.7 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 1037541801 | Offset in the file: 0x04001A |
| Vehicle maker's hardware number | EJ32-12A650-MEK | Offset in the file: 0x07255F |
| Software / calibration | EJ32-12B684-MC | Offset in the file: 0x0725C3 |
| Engine description | EJ32-14C204-MEK | Offset in the file: 0x07254C |
| Bosch project identifier (EPK) | 39/1/MED17/190///D1797_252_M010_0742/// | Offset in the file: 0x07FF08 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MED17.9.7 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number EJ32-14C204-MEK and software number 1037541801. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MED17.9.7
| Hardware | Software | Vehicles |
|---|---|---|
| EJ32-14C204-MBN | EJ32-12A650-MBN | Land Rover Range Rover Evoque |
| EJ32-14C204-MBP | 10SW005974 | Land Rover Range Rover |
| EJ32-14C204-MBS | 1037539251 | Land Rover Range Rover Evoque 2.0 Si4, Land Rover Range Rover Evoque |
| EJ32-14C204-MBS | 10SW011244 | Land Rover Range Rover Evoque |
| EJ32-14C204-MER | 10SW011249 | Land Rover Range Rover Evoque, Land Rover Evoque |
| EJ32-14C204-MKL | 1037544245 | Land Rover Range Rover |
| EJ32-14C204-MKP | 1037539251 | Land Rover Evoque |
| EJ32-14C204-MKP | 10SW005978 | Land Rover Range Rover Sport |