Original file

Land Rover Range Rover Bosch MED17.9.7 GJ32-14C204-MBE / 10SW008510

An original (stock) flash read of the Bosch MED17.9.7 control unit, fitted in Land Rover Range Rover, hardware number GJ32-14C204-MBE and software number 10SW008510, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Land Rover Range Rover2.0 240PS
Control unit
Bosch MED17.9.7
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
GJ32-14C204-MBE
Software number
10SW008510
Vehicle maker's hardware number
GJ32-12A650-MBE
Software / calibration
EJ32-12B684-MC

Technical data

Vehicle
BrandLand Rover
Car modelRange Rover
Engine2.0 240PS
Power240PS / 176.5kW
Control unit
Control unitBosch MED17.9.7
ECU makerBosch
Hardware numberGJ32-14C204-MBE
Software number10SW008510
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key1f8f736d99f879e2
Identification read from the file
ECU nameMED17.9.7
Read typeCalibration only (data set)
Bosch part / software10SW008510Offset in the file: 0x04001A
Vehicle maker's hardware numberGJ32-12A650-MBEOffset in the file: 0x072BAA
Software / calibrationEJ32-12B684-MCOffset in the file: 0x072CBD
Engine descriptionGJ32-14C204-MBEOffset in the file: 0x072B20
Bosch project identifier (EPK)39/1/MED17/190///D1797_262_M013_0343///Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.9.7 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number GJ32-14C204-MBE and software number 10SW008510. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.9.7

HardwareSoftwareVehicles
EX23-14C204-MBEEX23-12A650-MBEJaguar XF
EX23-14C204-MEF1037533234Jaguar XF
FK72-14C204-MBF1037554233Land Rover Freelander 2.0T, Land Rover Discovery
GJ32-14C204-MBC1037539251Land Rover Range Rover Evoque
GJ32-14C204-MBF10SW039374Land Rover Range Rover Evoque
GJ32-14C204-MKC1037539251Land Rover Range Rover
GJ32-14C204-MKCGJ32-14C204-MKCLand Rover Range Rover Evoque
GJ32-14C204-MKE10SW008513Land Rover Range Rover Evoque

Bosch MED17.9.7 original files

The Bosch MED17.9.7 unit page