Original file

Land Rover Range Rover Evoque Bosch MED17.9.7 GJ32-14C204-MKE / 10SW008513

An original (stock) flash read of the Bosch MED17.9.7 control unit, fitted in Land Rover Range Rover Evoque, hardware number GJ32-14C204-MKE and software number 10SW008513, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Land Rover Range Rover Evoque2.0 petrol 240PS
Control unit
Bosch MED17.9.7
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
GJ32-14C204-MKE
Software number
10SW008513
Vehicle maker's hardware number
GJ32-12A650-MKE
Software / calibration
EJ32-12B684-MC

Technical data

Vehicle
BrandLand Rover
Car modelRange Rover Evoque
Engine2.0 petrol 240PS
Power240.0PS / 176.5kW
Control unit
Control unitBosch MED17.9.7
ECU makerBosch
Hardware numberGJ32-14C204-MKE
Software number10SW008513
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyeff7f0f426e8c18b
Identification read from the file
ECU nameMED17.9.7
Read typeCalibration only (data set)
Bosch part / software10SW008513Offset in the file: 0x04001A
Vehicle maker's hardware numberGJ32-12A650-MKEOffset in the file: 0x072BAA
Software / calibrationEJ32-12B684-MCOffset in the file: 0x072CBD
Engine descriptionGJ32-14C204-MKEOffset in the file: 0x072B20
Bosch project identifier (EPK)39/1/MED17/190///D1797_262_M013_0343///Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.9.7 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number GJ32-14C204-MKE and software number 10SW008513. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.9.7

HardwareSoftwareVehicles
GJ32-14C204-MBE10SW008510Land Rover Range Rover
GJ32-14C204-MBF10SW039374Land Rover Range Rover Evoque
GJ32-14C204-MKC1037539251Land Rover Range Rover
GJ32-14C204-MKCGJ32-14C204-MKCLand Rover Range Rover Evoque
GJ32-14C204-MKF10SW039356Land Rover Range Rover Evoque
GJ32-14C204-MKFGJ32-14C204-MKFLand Rover Range Rover Evoque
GJ32-14C204-MNE1037539251Land Rover Range Rover
GJ32-14C204-MXB10SW008506Land Rover Range Rover

Bosch MED17.9.7 original files

The Bosch MED17.9.7 unit page