Original file

Land Rover Range Rover Bosch MED17.9.7 GJ32-14C204-MXB / 10SW008506

An original (stock) flash read of the Bosch MED17.9.7 control unit, fitted in Land Rover Range Rover, hardware number GJ32-14C204-MXB and software number 10SW008506, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Land Rover Range Rover2.0 petrol 240PS
Control unit
Bosch MED17.9.7
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
GJ32-14C204-MXB
Software number
10SW008506
Vehicle maker's hardware number
GJ32-12A650-MXB
Software / calibration
EJ32-12B684-MC

Technical data

Vehicle
BrandLand Rover
Car modelRange Rover
Engine2.0 petrol 240PS
Power240.0PS / 176.5kW
Control unit
Control unitBosch MED17.9.7
ECU makerBosch
Hardware numberGJ32-14C204-MXB
Software number10SW008506
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keydf1426880d87b269
Identification read from the file
ECU nameMED17.9.7
Read typeCalibration only (data set)
Bosch part / software10SW008506Offset in the file: 0x04001A
Vehicle maker's hardware numberGJ32-12A650-MXBOffset in the file: 0x073CF6
Software / calibrationEJ32-12B684-MCOffset in the file: 0x073E09
Engine descriptionGJ32-14C204-MXBOffset in the file: 0x073C6C
Bosch project identifier (EPK)39/1/MED17/190///D1797_263_M013_0343///Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.9.7 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number GJ32-14C204-MXB and software number 10SW008506. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.9.7

HardwareSoftwareVehicles
GJ32-14C204-MKE10SW008513Land Rover Range Rover Evoque
GJ32-14C204-MKF10SW039356Land Rover Range Rover Evoque
GJ32-14C204-MKFGJ32-14C204-MKFLand Rover Range Rover Evoque
GJ32-14C204-MNE1037539251Land Rover Range Rover
GK72-14C204-MBCGK72-14C204-MBCLand Rover Freelander
GK72-14C204-MBE10SW008518Land Rover Discovery
GK72-14C204-MCC1037539251Land Rover Range Rover Evoque
GK72-14C204-MCC10SW001718Land Rover Discovery Sport

Bosch MED17.9.7 original files

The Bosch MED17.9.7 unit page