Original file

Land Rover Freelander Bosch MED17.9.7 GK72-14C204-MBC / GK72-14C204-MBC

An original (stock) flash read of the Bosch MED17.9.7 control unit, fitted in Land Rover Freelander, hardware number GK72-14C204-MBC and software number GK72-14C204-MBC, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Land Rover Freelander2.0 · 240.0PS / 176.5kW
Control unit
Bosch MED17.9.7
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
GK72-14C204-MBC
Software number
GK72-14C204-MBC
Bosch part / software
10SW001717
Vehicle maker's hardware number
GK72-12A650-MBC
Software / calibration
EJ32-12B684-MC

Technical data

Vehicle
BrandLand Rover
Car modelFreelander
Engine2.0
FuelPetrol
Power240.0PS / 176.5kW
Control unit
Control unitBosch MED17.9.7
ECU makerBosch
Hardware numberGK72-14C204-MBC
Software numberGK72-14C204-MBC
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyb404ed8b5d81a74b
Identification read from the file
ECU nameMED17.9.7
Read typeCalibration only (data set)
Bosch part / software10SW001717Offset in the file: 0x04001A
Vehicle maker's hardware numberGK72-12A650-MBCOffset in the file: 0x072B22
Software / calibrationEJ32-12B684-MCOffset in the file: 0x072C35
Engine descriptionGK72-14C204-MBCOffset in the file: 0x072A98
Bosch project identifier (EPK)39/1/MED17/190///D1797_262_M013_0333///Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.9.7 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number GK72-14C204-MBC and software number GK72-14C204-MBC. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.9.7

HardwareSoftwareVehicles
GJ32-14C204-MKF10SW039356Land Rover Range Rover Evoque
GJ32-14C204-MKFGJ32-14C204-MKFLand Rover Range Rover Evoque
GJ32-14C204-MNE1037539251Land Rover Range Rover
GJ32-14C204-MXB10SW008506Land Rover Range Rover
GK72-14C204-MBE10SW008518Land Rover Discovery
GK72-14C204-MCC1037539251Land Rover Range Rover Evoque
GK72-14C204-MCC10SW001718Land Rover Discovery Sport
GW93-14C204-MHC10SW001727Jaguar XJ

Bosch MED17.9.7 original files

The Bosch MED17.9.7 unit page