Original file

Hyundai i30 Bosch MED17.9.8 10SW003036

An original (stock) flash read of the Bosch MED17.9.8 control unit, fitted in Hyundai i30, software number 10SW003036, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Hyundai i301.6 petrol 217PS
Control unit
Bosch MED17.9.8
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Software number
10SW003036
Software / calibration
GTFS-GE56FS02600

Technical data

Vehicle
BrandHyundai
Car modeli30
Engine1.6 petrol 217PS
Control unit
Control unitBosch MED17.9.8
ECU makerBosch
Software number10SW003036
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameL533CC0
File key29d3512e46465898
Identification read from the file
ECU nameMED17.9.8
Read typeCalibration only (data set)
Bosch part / software10SW003036Offset in the file: 0x04001A
Software / calibrationGTFS-GE56FS02600Offset in the file: 0x07FE0C
Bosch project identifier (EPK)53/1/MED17/147/MED17.9.8//UCGG20L1/GTFS_GE56FS02600//Offset in the file: 0x07FE0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.9.8 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, software number 10SW003036. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.9.8

HardwareSoftwareVehicles
1037555698Kia cee`d, Kia Carens
10SW001797Kia cee`d, Kia Ceed, Kia Cee'd
10SW001798Kia
10SW003028Hyundai Tucson
10SW006169Kia Sportage
10SW006170Kia Sportage
10SW006173Kia Sportage
10SW006178Kia Sportage

Bosch MED17.9.8 original files

The Bosch MED17.9.8 unit page