Original file

Kia Bosch MED17.9.8 10SW007566

An original (stock) flash read of the Bosch MED17.9.8 control unit, fitted in Kia, software number 10SW007566, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Kia
Control unit
Bosch MED17.9.8
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Software number
10SW007566
Software / calibration
GIQL-GE56FS02600

Technical data

Vehicle
BrandKia
Control unit
Control unitBosch MED17.9.8
ECU makerBosch
Software number10SW007566
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key5d40dde4669c8fce
Identification read from the file
ECU nameMED17.9.8
Read typeOBD read (no boot area)
ProcessorTC1767
Bosch part / software10SW007566Offset in the file: 0x08001A
Software / calibrationGIQL-GE56FS02600Offset in the file: 0x07FE0C
Internal build stringME(D)/EDC17 B_CB.02.04.00Offset in the file: 0x00FC58
Bosch project identifier (EPK)53/1/MED17/147/MED17.9.8//DCGB10R0/GIQL_GE56FS02600//Offset in the file: 0x07FE0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.9.8 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, software number 10SW007566. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Kia SportageFlash2,048.00 KB€15Add to cart

All reads of 10SW007566

Other pairs of Bosch MED17.9.8

HardwareSoftwareVehicles
10SW006173Kia Sportage
10SW006178Kia Sportage
10SW006787Kia Sportage
10SW007553Hyundai Tucson
10SW009479Hyundai Tucson
10SW009481Hyundai Tucson
10SW009638Hyundai i30
10SW012642Hyundai Veloster

Bosch MED17.9.8 original files

The Bosch MED17.9.8 unit page